Create Imaging Association


By clicking the button in the upper right-hand corner of the imaging association view, we can create a new association.


We'll create a new association every time we want to assign an image/driver pack to a device that doesn’t have one. Each device can have one and only one imaging association.


We'll choose the image to use from the "Choose Image" button shown above, the driver pack (optional) in the center, and the device(s) at the bottom.  The process is shown in brief below:

Note: If you add an association for a device that already has one, you will be prompted for overwite/cancel as follows:

Revision #1
Created 10 July 2023 19:52:08 by Josh Levitsky
Updated 10 July 2023 20:24:00 by Josh Levitsky