Skip to end of metadata
Go to start of metadata

What

FileWave's TeamViewer integration requires endpoint pre-requisites on each supported platform.  How we choose to deploy these components is flexible, but this article is a good best-practice to follow for simplicity.

When/Why

There are two elements we need to deploy to support TeamViewer on Android EMM devices:

  • The TeamViewer QuickSupport App, which provides basic TeamViewer viewing capabilities, and
  • The TeamViewer QuickSupport Add-On tool, which provides the ability to control the endpoint's cursor and keyboard

How

To keep the distribution simple and elegant, we'll probably want to build a structure that looks something this:

Note that you could also publish all of the apps needed to the Play Store Kiosk on the devices as well, but we feel that would be pretty cluttered for the users of the devices, albeit simpler for the FileWave admin.


In our structure, the top-level group is just a manual group, and we will assign the fileset (payload) for the TeamViewer QuickSupport app here.  Below that top level group we'll create groups for each type of Android device we have.  The add-on is device-specific, therefore we will create a smart group for each device type based on the Device Product Name field.

In the case of the Lenovo M10 tablet, the product name is "Lenovo TB-X605F", so we created a Smart Group based on Device Product Name matching that exact name.  Because this group is a smart group all M10 tablets will automatically be included, and therefore will have the QuickSupport app assigned from the group above, which addresses our first pre-requisite.  

Remember, you can duplicate a smart group by right-clicking and choosing "Duplicate"...this makes it much simpler to add multiple, similar smart groups.

Now, for the Add-On installation...it is a bit more complicated because we don't know which add-on fits our device best.  In this case, it is best to just cheat and let the TeamViewer QuickSupport app recommend the add-on to install on a sample device.  In our case, it recommends an add on for the x705F, found here: https://play.google.com/store/apps/details?id=com.teamviewer.quicksupport.addon.lenovo_tb_x705f

So, we'll now create a fileset for that app. and assign it to the appropriate smart group. Then, rinse and repeat for each device type, which hopefully won't be too many.

There is also a Universal Add-On available, but at least in our testing the device-specific add-ons worked best.

On initial setup, the option for starting a remote control session for an Android can be delayed to allow synchronization between FileWave/Google.  This is only at setup of the device though, and should complete within 15-30 minutes max.