This article will help you enable location services and open the FileWave app on devices to start the reporting process.
The EMM FileWave client will send location every 15min but needs to be launched one time to start this process and location services need to be on to support the app.
Note that for any location services through the Android companion app to function, there is a server side setting for Android that must be enabled (for version 13.3.x). See related article here: Location Tracking
Close that window
You do NOT need to associate the app out to devices, FileWave does this automatically. You are only adding this application from the play store so you can select it in the policy
Change "Location accuracy" to "High Accuracy" (Figure 1.2)
This setting to turn on location services is not mandated...a customer can turn their location services back off. There is no policy available to prevent this.
However, if you make any other policy changes to that device and update the model, this same policy will turn it back on again. (Every time the policy is changed it applies wholly again to the device)
Select your "Play Store App - FW Client" fileset (Figure 1.3)
|Figure 1.1 - FW Client on Play Store|
|Figure 1.2 - Policy for Location|
|Figure 1.3 - Policy for Dedicated Task|