The FileWave Client runs on both OS X/macOS and Windows computers with the following requirements:

Operating Systems Supported:

Downloading the FileWave client installer

The FileWave Client installer is available as part of the FileWave bundle for the specific operating system. The most current version, as well as selected older versions, of the installer are located on the FileWave web site under the Resources tab: For the computers mentioned under Legacy Support, you will need to install the FileWave v9.1.2 client, or keep any older client already installed.

You should download all installers you will need for your deployment at the same time. They can be stored on a file server, or on a flash drive in Windows format for cross platform compatibility (OS X / macOS systems can read Windows-formatted drives without additional drivers).
Note: The installer instructions for the Linux server and Booster are also located on the same page of the web site. Server installation instructions are covered at the beginning of Chapter 2. There is no Linux client.

Installing the FileWave client

Client installers for both macOS and Windows use the same general dialogs. You will need to read and accept the license agreement, and you will be presented with a dialog window asking you for specific information to connect your client. Note: on some Windows computers, the FileWave Client Installer Assistant window is positioned directly behind the installer window, which you need to move to get to the Installer Assistant to complete the installation.

Installation settings

Note: More on working with FileWave Boosters in Chapter 3.

Edit Custom Data…

The custom fields consist of a series of optional Inventory data fields that can be used to provide more detailed information on any Client. This information cannot be set in the automated installer, and must be applied manually. The information provided will be displayed as part of the Client Info in the Clients pane of the main FileWave Admin window by right-clicking on any client and selecting the Client Info… menu item, as well as in Inventory queries.

Automating installation with a custom client installer

While the manual method of running the installer and entering all of the connection information works fine for small deployments, FileWave provides you with the ability to perform larger scale installations. A customized client installer is available through the FileWave website:
For macOS:
For Windows:
The customized client for macOS X required for MDM/DEP support and is required to be uploaded as part of the Mobile preferences in FileWave Admin.
The form is shown on the next page.

Many fields are required.

Note that the default port is 20015. If you want SSL, do not set it to 20017; click the "Advanced Options" box, which will display more options (shown on the next page), one of which is Enable SSL. Therefore, if you want SSL, leave the Server port set to 20015, then click the "Enable SSL" check box which will result in the proper setting for using SSL.

Advanced Options

The custom installer does not ask the user for any device specific information, and can be distributed through several means:

Note: FileWave provides "recipes" of possible deployment workflows for the custom installer on our website.